Tormek MB-100 Multi Base

With the Multi Base MB-100, you can sharpen on the side of the Tormek Diamond Wheels , thus creating a completely flat bevel that is preferable in some applications . The MB-100 has an adjustment line that allows you to fix the sharpening position based on the optimal setting for each tool and jig . For convenience, it can be mounted either vertically or horizontally.

The MB-100 can be used with the Tormek jigs: SVM-45 Knife Jig, SVM-140 Long Knife Jig, SVM-00 Small Knife Holder, SVX-150 Scissors Jig, SVA-170 Axe Jig, SVS-38 Short Tool Jig , SVD-186 Gouge Jig, SVS-50 Multi Jig, SE-77 Square Edge Jig and SVD-110 Tool Rest.

Setting the edge angle

When setting the sharpening angle with the updated WM -200 AngleMaster, use the top angle scale, marked with MB-100. When setting the sharpening angle with the previous WM -200, add 18 degrees to your preferred angel. Example: If you are going the sharpen a chisel to a 25-degree angle, add 18 degrees on the Angle Master, ie 43 degrees. Always set the wheel diameter compensator on WM-200 to 250 mm when sharpening with the MB-100.

Please note that the MB-100 is only designed for sharpening with Tormek Diamond Wheels . It is not suitable for grinding stones as they would require truing which is not possible on the side .